Need to connect LoRaWAN and OPC UA? The Weble WBox routes LoRaWAN OPC UA natively: one gateway speaks both protocols and maps data points in real time — no PC, no middleware, no cloud dependency.

LoRaWAN⇄WBoxgateway⇄OPC UAOne WBox gateway · native conversion · no PC

The protocols

LoRaWAN

LoRaWAN carries data from battery-powered sensors over several kilometres with very low power.

LoRaWAN driver →

OPC UA

OPC UA is the secure, platform-independent client/server standard for Industry 4.0 data exchange.

OPC UA driver →

Example deployment

Typical scenario LoRaWAN telemetry into OPC UA An industrial operator wants long-range LoRaWAN telemetry — remote tanks, outdoor stations, utility sub-meters — inside the same OPC UA SCADA as the plant. The WBox decodes the LoRaWAN uplinks and exposes them as OPC UA nodes with engineering units, so distant wireless points appear next to the wired process data. Technical documentation →

How the WBox bridges LoRaWAN and OPC UA

On the WBox you enable the LoRaWAN driver and the OPC UA driver, then map each point: a value read on the LoRaWAN side — long-range, low-power wireless — is exposed on the OPC UA side — the industrial interoperability standard — and vice-versa. Conversion, scaling and logic run on the gateway itself.

Capacity & limits

  • LoRaWAN — LoRaWAN scales with the network server; device count is bounded by gateway coverage and airtime, not by the WBox.
  • OPC UA — OPC UA imposes no node limit — the address space scales with the server.

On the WBox, a driver licence enables the whole protocol — there is no artificial per-point tier to unlock. Capacity scales with the gateway model, from the compact S103 to the E413: you are bounded by the field bus, not by your licence.

Frequently asked questions

How do I connect LoRaWAN and OPC UA?

LoRaWAN is long-range, low-power wireless and OPC UA is the industrial interoperability standard. A single WBox gateway runs the LoRaWAN and OPC UA drivers, speaks both protocols at once and maps the data points between them — no PC, no middleware, no cloud dependency.

Is the LoRaWAN ⇄ OPC UA bridge bidirectional?

Yes. The WBox reads and writes on both sides: a value or command on the LoRaWAN side propagates to OPC UA, and vice-versa.

Do I need a PC, a PLC or proprietary hardware?

No. The LoRaWAN and OPC UA drivers are licence-activated on one WBox — no gateway PC, no intermediate PLC and no proprietary hardware.

Which WBox model do I need?

Any WBox with the LoRaWAN and OPC UA driver licences. The online configurator recommends the right model from your interfaces and point count.

Route LoRaWAN OPC UA on your project

Find the right WBox gateway for your installation, or get in touch to validate your case.

Configure my gateway

Related routes

← All routes